first page

UNIT FOR PROGRAMMING CONTROLS AND RECORDING MEASUREMENTS, ALARMS & STATUS 

  DAM 675

 click on picture to enlarge

 Path - First page - Products - Devices for Various Uses - DAM 675

APPLICATION

On-Off control of five digital outputs with timed programmes or with independent dates Permits acquiring signals of measurements with alarm potential and On-Off signals of alarms or status or metering.

  • compatible.

FEATURES

  • Power supply: 230 V ~.

  • Consumption: 5 VA.

  • DIN 105 x 115 modular case.

  • Protection: IP 40.

  • Digital programming by means of four operational keys and alphanumeric display.

  • Setting with dates of heating season and automatic switching GMT - BST.

  • Seven 24-hour programmes, five 7-day programmes, 30 annual periods and one special period with setting of dates.

  • 2 SPDT relay outputs and 3 SPST outputs for programmed On-Off controls.

  • 1 relay output for local signalling of alarm status.

  • 3 On-Off inputs for alarms, status or metering.

  • 7 inputs of measurements with alarm potential (Pt 1 kΩ, NTC 1 kΩ, NTC 10 kΩ, 4 ... 20 mA or 0 ... 10 V-) or 7 On-Off inputs for alarm or status.

  • Degree days metering.

Code  

Description 

Data sheet
DAM 675  

Unit for programming controls and measurements, alarms and status.

D 510

DETECTORS & ACCESSORIES

Code   Description Setting range

Sensing element

 Data sheet
SIH 010   Immersion water temperature detector. 0 ... 99 °C NTC 10 kΩ N 140
SAB 010   Room temperature detector. 0 ... 40 °C NTC 10 kΩ N 111
STF 001   Flue gases temperature detector. 0 ... 400 °C Pt 1 kΩ N 165
STH 001   Immersion high temperature detector. 0 ... 400 °C Pt 1 kΩ N 140
SAE 001   Outside temperature detector. ­30 ... 30 °C NTC 1 kΩ N 120
ASA 420   Accessoy for connection active detector 4 ... 20 mA. – – –
ASA 010   Accessoy for connection active detector 0 ... 10 V-. – – –